Move WFV

Transfer WP file version to an other site?

You will need to recalculate the data location length.

Here is a quick made converter.

 

Google Chrome isn’t in the repositories – however, Chromium is.

Google Chrome is only available for 64-bit Linux. I’ve included directions for 64 below.

To install Google Chrome, run the following:

sudo apt-get install libxss1 libappindicator1 libindicator7
wget https://dl.google.com/linux/direct/google-chrome-stable_current_amd64.deb
sudo dpkg -i google-chrome*.deb

If error messages pop up after running the command sudo dpkg -i google-chrome*.deb then run the command

sudo apt-get install -f

and then re-run the previous command. The error messages mentioned should include something similar to

google-chrome-stable depends on [lib-example]; however; Package [lib-example] is not installed.

This installs a needed library for Google Chrome, then downloads the latest version of Chrome to a temporary directory and installs it. Run google-chrome to start the browser.

During the installation a PPA is added to your system so that Google Chrome receives the latest updates whenever you check for system updates.

Reverting to a previous version of HyperBackup fixed my problem.

I manually install the previous version of HyperBackup it can be found here: http://download.synology.com/download/Package/spk/HyperBackup/2.0.1-0384/

You need to uninstall the current version first, then manually install the previous version using the .sdk that matches your hardware.

Make sure that HyperBackup isn’t set to auto update.

I keep a backup of the last working version of HyperBackup here 😉

HyperBackup-armada38x-2.0.1-0384.spk
HyperBackup-armada370-2.0.1-0384.spk
HyperBackup-armada375-2.0.1-0384.spk
HyperBackup-armadaxp-2.0.1-0384.spk
HyperBackup-armv5-2.0.1-0384.spk
HyperBackup-armv7-2.0.1-0384.spk
HyperBackup-comcerto2k-2.0.1-0384.spk
HyperBackup-hi3535-2.0.1-0384.spk
HyperBackup-i686-2.0.1-0384.spk
HyperBackup-monaco-2.0.1-0384.spk
HyperBackup-ppc-2.0.1-0384.spk
HyperBackup-x86_64-2.0.1-0384.spk

To find out which version to download I downloaded HyperBackup from Synology.com download section for compareation.

On-Screen keyboard
Installing the on-screen keyboard is not the solution to develop software or write long text documents on the Raspberry PI, but it is a must-to-have to make complete the user interaction options. Installing the keyboard is a very simple operation that can be done with a single command from the terminal:

just as it is explained in the product document page on Element14. The documentation says that the keyboard (after installation and reboot) is accessible on-screen from the Menu->Accessories->Keyboard. Doing several installations I have verified that the keyboard is not always listed as a new menu option; one of the reasons depends on the previous presence of a physical keyboard connected to the Raspberry or not. To be sure that the on-screen keyboard is added to the desktop menu after installation the better choice is to manage the Raspberry PI from remote via SSH.

The on-screen keyboard can be shown by your applications or bash scripts with the command

cfdisk /dev/sda
mkfs.ext3 /dev/sda1
mkdir /disk2
blkid /dev/sda1

nano /etc/fstab
indsæt UUID=”97174799-0902-43b7-86d3-e42417xxxxxx” /disk2 ext3 errors=remount-ro 0 1
mount /disk2

Proxmox – log out and then back in
Datacenter/storage/add/Directory
id: Disk2
Directory: /disk2
Content: Diskimage/Container template